Preacher, this is what helped me getting my SB PCI 128 work in DOS. Maybe it can be useful with your SB Live. If it does not, let me know.
File: SBPCIDOS.TXT
Author: Pat Kenny (prkenny@zip.com.au)
Date: 26 January 2000
Purpose: This document describes the steps to get the Creative Labs Vibra 128 sound card (Vibra 128) and the Creative Labs Sound Blaster PCI 128 sound card (SBPCI 128) working in the DOS operating system (as opposed to DOS sessions run from, or in the version of DOS accompanying, Windows 95/98). In the absence of any documentation on the subject by Creative Labs, the process has been determined empirically by the author through trial and error. Accordingly, the steps described may not work with all PCs. Further, the author had access to the Vibra 128, but not to the SBPCI 128, so the DOS installation process has only been validated for the Vibra 128 by the author. Confirmation of the validity of the DOS installation process for the SBPCI 128 sound card, or of improvements to the DOS installation process for either sound card, would accordingly be welcomed.
Test Bed Configuration:
Hardware:
Motherboard: twaNP5TX-Bpro ver 2.0e 09/25/1997
Bios: Award Modular Bios v 4.51PG
CPU: Pentium 200 MMX
Memory: 64 MBytes
Hard Disk: 2.5 GByte IDE
Floppy Disk Drive: 1.44 MByte 3.5"
CDROM: Mitsumi 6x IDE
Sound Card: Creative Labs Vibra 128 PCI
Video Card: S3 Trio 64 1 MByte PCI
Video Bios: S3 86C775 Video BIOS Version 1.01.04 06/27/97
Video Monitor: Ipex 15" SVGA
Network Card: Compex FL32 DEC 21041 Ethernet PCI
Keyboard: 104 key IBM
Mouse: Logitech 3-button
Software:
Operating System: MS DOS 6.22
Other Software: 3D Realms - Duke Nukem 3D
Interplay - Redneck Rampage
Capstone - Witch Haven
Capstone - Witch Haven 2
Microsoft Windows for Workgroups 3.11
DOS Installation Procedure for Vibra 128 & SBPCI 128:
1. The following DOS installation files are included with the Creative Labs driver set for the Vibra 128 / SBPCI 128. They must be copied to a directory (eg, C:\SBPCI) on the PC's Hard Drive.
sblegacy.exe
sbinit.com
sbpci.bin
sbpci.ini
2. The following waveset files are also included with the Creative Labs driver set for the Vibra 128 / SBPCI 128. At least one of these files must be copied to a directory (eg, C:\SBPCI\WAVESETS) on the PC's Hard Drive:
eapci2m.ecw
eapci4m.ecw
eapci8m.ecw
Renaming a copy of the chosen file to "default.ecw" is recommended.
3. A specific line (normally the last line) in the sbpci.ini file must be edited to point to the location and name of the chosen waveset file, as follows (using the suggested directory and naming convention as an example):
Synthfile=c:\SBPCI\WAVESETS\default.ecw
4. The following entries must be inserted into the autoexec.bat file in the root directory of the C: drive (using the directory examples suggested in paragraphs 1 & 2):
SET SBPCI=C:\SBPCI
SET BLASTER=A:220 I:7 D:1 T:2
C:\SBPCI\SBLEGACY.EXE
C:\SBPCI\SBINIT.COM
Note that the values used in the "SET BLASTER=" statement should correspond with those specified in the SBPCI.INI file (A:<IO Port Address> I:<IRQ> D:<DMA> T:<Sound Blaster version>). Note also that SBLEGACY.EXE must be run before SBINIT.COM.
5. After rebooting the PC, DOS applications should recognise, and be able to use, the Vibra 128 / SBPCI 128 as an 8-bit mono sound blaster card. Each of the listed software applications were successful in doing so on the test bed. The author successively tested BLASTER environment variable values corresponding to a Sound Blaster Pro, a Sound Blaster 16 and a Sound Blaster AWE32 (all stereo cards), but the Vibra 128 responded as an 8-bit mon sound blaster card each time.
6. The following useful DOS utilities are also provided with the Creative Labs driver sets for use with the DOS installation of the Vibra 128 / SBPCI 128:
sbcfg.exe
sbload.exe
sbmixer.exe
sbtest.exe
mt32.exe