Hello everybody

kiyara

Spaceman
Hello.

It completed it.
It finished in this way.
To finish it up in the size of 15cm, the wing is made fat.



Shape was complex, and production was very.
The price will rise a little than Tiger Claws.
 

kiyara

Spaceman
The movie

Hello.

It is a Tiger craw of the movie.
This lacks material, too.
The photograph of set material is only indistinct.
The movie pictures is not bright enough, and the judgment is difficult.

Front View

Rear View



The part that doesn't understand is an imagination.
 

kiyara

Spaceman
remodeled

>Mr.Micah28

Thank you for pointing it out.

The bridge was reduced.

The impression changed.



Please let me hear the impression.
 

Bob McDob

Better Health Through Less Flavor
Wow, you work fast. Couple things I noticed:

* The bridge (conning tower) on the Snakeir isn't nearly large enough - the lineart shows it as being the highest point on the ship, as well as the most prominent. The little hollow shell-shaped parts are too high, too; they should be smaller and at a shallower angle. The rear of the ship is too long and big; it's about 2/5s of the length of the ship, where as it seems more like half on the model. It's slightly hard to tell though, since the software warps perspective awkwardly.

* The Tiger's Claw seems good. I have some good official art of it I can scan, though in general the movie ships aren't nearly as well-documented as others. I ran into the same problem when I tried to recreate the movie Concordia.

* The new bridge on the destroyer looks good, though you should shrink the engines too; they're rather large. Maybe 80-70% of the current size?

Here's a reference: https://www.wcnews.com/ships/wc3destroyer.shtml

All in all, I personally think you're doing a fine job improvising where you have to; it's what many of the community modelers have done at one point or another when they ran into problems recreating certain designs.
 
Last edited by a moderator:

Dran

Nothing is written here
Are you going to make these with diecast metal, and paint. If so I want some of these. I checked your site and I get many "????" How can I order these? They are really good.
 

kiyara

Spaceman
thank you

Hello.

>Mr.Bob McDob

Thank you for your impression.
It is as you say.
The bridge is too small.
Therefore, the back looks large more than the necessity.
It is corrected now.
After the back is reduced a little more, it is likely to form it.

The engine of the destroyer is corrected.
The size when forming it is small.
Therefore, it might be unquestionable.

>Mr.Dran

Thank you for questioning.
These works cut down and made the resin.
It is because the demand for a metallic model is a little in Japan.

Most is one shape.
The size is from 18cm to 5cm.
It doesn't paint.

I am making it alone.
Therefore, it is not possible even to paint.
I will paint the prototype.
However, it is done more later.

Please E-mail the order addressed to me.
We will inform of details.

As for any work, the size is arbitrarily revokable.
It corresponds by 30cm.
The price goes up greatly when 15cm is exceeded.
When it is 30cm, 30000yen is exceeded in Japanese yen.
 

kiyara

Spaceman
The fighter is too small.
Therefore, it is very difficult in my production machine.

I love ships.
The airplane is not interesting.

It is especially because the production of the ship is busy now.
 

Bob McDob

Better Health Through Less Flavor
I am making it alone.
Therefore, it is not possible even to paint.
I will paint the prototype.
However, it is done more later.
I wouldn't worry about that; there are plenty of people, here and outside the community, who enjoy painting miniatures.

Please E-mail the order addressed to me.
We will inform of details.
Any Japanese-speaking wingnuts up for acting as intermediaries? I can understand you fine, Kiyara, but there are a number of people who can't. I don't think this is much of a problem in a discussion like this, but when there's money changing hands the risk of confusion is too high.

As for any work, the size is arbitrarily revokable.
It corresponds by 30cm.
The price goes up greatly when 15cm is exceeded.
When it is 30cm, 30000yen is exceeded in Japanese yen.
I don't think you should go over 15cm, at least on general-production models; I think ¥10,000 is the most a lot of people would be willing to pay (though there are probably one or two people who would be willing to pay that price.) 15cm is plenty big, anyway; it might even be too big for people who are looking to use them as miniatures in a board wargame.
 

kiyara

Spaceman
Thank you for giving advice.

The model of the relation of the wing commander is rare.
The fighter has seen.
However, the ship has not seen.
Especially, it doesn't exist in Japan at all.

I obtained the method that formed from CAD system.
If it was an easy forming, it was method that was able to be made
easily at a low price.
It is easy for the ship of the game to form it.
And, wing commander's work was chosen.

Normally, it might be a thing that should be privately enjoyed.
However, it is thought that a good work was completed.
Therefore, there might be a person wanting it.
However, there is will being not to do business.
Everything will not be obtained in March.

After that, I will enjoy it for myself.
 

kiyara

Spaceman
Fighter.

As for the fighter of the PC version, you are produced.
Therefore, I made the movie version.


The expression of the cockpit cannot be drawn well with the system of
my CAD.
This is a limit.
 

McGruff

Banned
My Bengal is every bit as awesome as in the pictures, and it got here from Japan FAST. If you make more ships and fighters from the games (not the movie), I'll probably buy those as well.:D Thanks!
 

kiyara

Spaceman
>Mr.McGruff

I wish to express my gratitude for your advice.

It was relieved because it reached safely.
A new work is scheduled to be completed soon.

I also am looking forward to it.
 
Top